The Solution

What to Look for in a Home Inspection

Before you purchase property, you have to ascertain that the building is in good shape. A previously used house may have several flaws in it. Probably that is the reason why the past owner is doing away with it. That is why you need to check around and ensure that the house is in a good structural condition. Other things you should check out for include electrical and plumbing installations.

For this reason, you need to carry out a home inspection. This is usually carried out by an individual or property assessor who will then inform the prospective buyer of the exact condition of the house. All the same, there are standard things to be on the lookout for when carrying out an inspection or your soon-to-be house. The checklist below will be of great assistance.

  1. Overall impression

Examine the house from outside. Compare it with others in the same locality. Check whether the construction style is the same. See how other houses in the neighborhood have been maintained. Look for modifications on the building’s exterior and make a quick judgment on whether good workmanship was employed.

  1. Start with the exterior

Starting with the front then moving either clockwise or the other way round. At each front, visualize the building from top to bottom. For instance, look at the roof, chimney, fascia board, gutters, wall, windows and doors. Examine the porches, foundation, driveway, walkway and flower beds if any. Move a little bit closer and try to locate anything that you could have missed while you were standing at a distance. Repeat this for all sides of the house. A Houston Foundation Inspection is important in the overall process to ensure that the home is secure and safe to live in.

  1. Move inside

While inside the house, start with the basement going upwards. The way to inspect a building from inside is to start with its floor, walls and ceiling in that order. If there are appliances, take note of them as well as their condition. Move systematically from one room to another in a clockwise or counter-clockwise direction. When you come to the basement’s utility room remember to check the heater, furnace, plumbing fitting and the electrical installation.

  1. Utilities

Most houses do have a single room where all utilities originate from. Usually this is at the basement. After ascertaining the condition of the utilities, see how they terminate in all the rooms. Look for light bulbs, sockets and switches. In the kitchen and bathroom, take note of the water faucets and other plumbing utilities.

  1. Doors and windows

These should be in perfect working order. Check whether the hinges are loose; look for broken locks and such like things. In the case of windows, the panes should be intact. Note any missing or broken panes.

No comments yet.

Add your response